Volvo XC90: Displays and voice control / Linking a remote key to a driver profile
A remote key can be linked to a driver profile. This driver profile and all
of its settings will then automatically be selected every time the vehicle is used
with that particular remote key.
The first time the remote key is used, it is not linked to any specific driver
profile. The Guest profile is automatically activated when the ignition is
switched on.
A driver profile can also be selected manually without linking it to any key.
When the vehicle is unlocked, the last active driver profile will be activated.
If the key has ever been linked to a driver profile, it is not necessary to manually
select a driver profile when using that particular key.
Linking a remote key to a specific driver profile
NOTE
A remote key can only be connected to a driver profile when the vehicle
is stationary.
First select the profile you would like to link to the key (if that profile is
not already active).
The active profile can then be linked to the key.
- Tap Settings in the Top view in the center display.
- Tap System Driver Profiles.
- Mark the desired profile. The display will return to Home view. The Guest
profile cannot be linked to a remote key.
- Pull down Top view again and tap Settings
System
Driver Profiles
Edit Profile.
- Select Connect key to link the profile with the key. A driver profile
can only be linked to the key currently being used in the vehicle. If there
are any other keys in the vehicle, More than one key is found, put the key
you want to connect on backup reader will be displayed.
Location of the backup reader in the tunnel console.
- When Profile connected to key is displayed, the key and driver
profile have been linked.
- Tap OK.
- The key used is now linked to the driver profile and will remain so
as long as the Connect key box is not deselected.
It may not always be desirable to store settings made in the vehicle to the
active driver profile. In these instances, the driver profile can be protected...
Settings that have been saved for one or more driver profiles can be reset
when the vehicle is stationary.
NOTE
Factory Reset is only possible when the vehicle is stationary...
Other information:
Cruise control (CC1) can be deactivated and switched off.
Press the button on the steering
wheel (2).
The symbol and markings turn gray – cruise control goes into standby
mode.
Press the (1) or
(3) buttons on the steering wheel
to select another function...
The Collision avoidance function can help the driver reduce the risk
of the vehicle leaving its lane unintentionally and/or colliding with another vehicle
or obstacle by actively steering the vehicle back into its lane and/or swerving.
The function consists of these subfunctions:
Run-Off Mitigation with steering assistance
Steering assistance during collision risks from oncoming traffic
Stee..