Volvo XC90: Starting and driving / Regenerative braking
The vehicle recovers kinetic energy during braking in order to reduce fuel
consumption and emissions.
The battery symbol is shown in
the instrument panel when the vehicle is generating power for the battery1.
The function is available in all drive modes together with gear selector position
D or M.
Activating brake regeneration
Brake regeneration is activated by gentle pressure on the brake pedal or during
engine braking.
Regeneration increases during engine braking if manual gear selector position
M is selected.
1 The symbol is used in vehicles with 48 V batteries.
In a collision in which the activation level is reached for the pyrotechnic
seat belt tensioners or airbags, or if a collision with a large animal is detected,
the vehicle's brakes will be automatically activated...
The transmission is part of the vehicle's driveline (power transmission) between
the engine and the drive wheels. The function of the transmission is to change gears
depending on speed and power needs...
Other information:
Start/stop is a function that temporarily turns off the engine when the vehicle
is stationary and then automatically starts it when needed. The Start/Stop function
is available when the ignition is started and can be activated if certain conditions
are met...
(Option/accessory.) (Certain markets only.)
Follow these instructions to program HomeLink®, reset all programming, or
program individual buttons.
NOTE
In some vehicles, the ignition must be on or in the "accessory position"
before HomeLink® can be programmed or used...