Volvo XC90: Driver support / BLIS limitations
BLIS1 functionality may be reduced in certain situations.

Keep the marked area clean (on both the left and right sides
of the vehicle)2.
Examples of limitations:
- Dirt, ice and snow covering the sensors may reduce functionality and prevent
the system from providing warnings.
- The BLIS function is automatically deactivated if a trailer, bicycle holder
or similar is connected to the vehicle's electrical system.
- For BLIS to function effectively, bicycle holders, luggage racks or similar
should not be mounted on the vehicle's towbar.
WARNING
- BLIS does not work in sharp curves.
- BLIS does not work when the vehicle is being reversed.
NOTE
The function uses the vehicle's radar sensors, which have certain general
limitations.
1 Blind Spot Information
2 Note: This illustration is general and details may
vary depending on model.
The BLIS1 function can be activated or deactivated.
Activate or deactivate the function
using this button in the center display's Function view.
GREEN button indicator light – the function is activated...
A number of messages related to BLIS1 may be displayed in the instrument
panel. Several examples are provided below.
A An authorized Volvo workshop is recommended...
Other information:
The cover can be used in two positions: fully open to completely cover the
cargo compartment or partially retracted to make it easier to reach further into
the cargo compartment.
Fully open
7-seat models
Hang the third-row seat belt latches in the hooks provided in the side panels...
Make sure that all passengers have buckled their seat belts before starting
to drive.
Buckling seat belts
Pull out the belt slowly and make sure it is not twisted or damaged.If
the seat belt in the second row center seating position1
is used, make sure it is properly positioned in the correct seat belt guide...