Volvo XC90: Starting and driving / Deactivating the Start/Stop function
In certain situations, it may be advisable to turn the Start/Stop function
off.
To turn off Start/Stop, tap the
Start/Stop function button in the center display's Function view. The indicator
light in the button will go out when the function has been turned off.
The function will remain turned off until:
- it is reactivated
- the drive mode is changed to Eco.
Start/stop is a function that temporarily turns off the engine when the vehicle
is stationary and then automatically starts it when needed. The Start/Stop function
is available when the ignition is started and can be activated if certain conditions
are met...
Certain conditions must be met for Start/Stop to function.
If any condition is not met, this will be indicated in the instrument panel.
The engine does not auto-stop
The engine will not auto-stop if:
The vehicle has not reached a speed of ca 10 km/h (6 mph) after starting...
Other information:
The radar sensor is used by several driver support systems to detect other
vehicles.
Location of radar sensor
The radar sensor is used by the following functions:
Distance Alert*
Adaptive Cruise Control*
Pilot Assist*
Lane Keeping Aid
City Safety
Steering assistance at risk of collision
Any modifications to the radar sensor may make its use illegal...
The Park Assist Cameras (PAC1) can display a 360° panoramic view
as well as separate views for each of the four cameras: rear, front, left and right.
360° view*
The location of the cameras and their approximate fields of
vision.
The 360° view function activates all Park Assist Cameras and all four
sides of the vehicle are shown in the center display at once to help the driver
see what is a..