Volvo XC90: Starting and driving / Start/Stop function
Start/Stop is a function that temporarily switches off the engine when the
vehicle has stopped, e.g. at a traffic light or in heavy traffic, and then starts
it again automatically when needed.
The Start/Stop function reduces fuel consumption, which helps to reduce exhaust
emissions.
The system makes it possible to drive more economically and climate-smart by
letting the engine auto-stop when appropriate.
There is a function button for Eco drive mode in the center display's Function
view if the vehicle is not equipped with a drive mode control in the tunnel console...
Start/stop is a function that temporarily turns off the engine when the vehicle
is stationary and then automatically starts it when needed. The Start/Stop function
is available when the ignition is started and can be activated if certain conditions
are met...
Other information:
When driving with the lighting ring in the
position, low beam will be automatically
activated in weak daylight or dark conditions, when the ignition is in the II
position.
Lighting ring in AUTO position.
With the lighting ring in the position,
the low beams will be automatically activated if:
the front fog lights* are activated
the rear fog light is activated
the rear and front fog lights ar..
The tread wear indicator shows the status of the tire's tread.
The tread wear indicator is a narrow elevated strip running across the tire's
longitudinal tread grooves. The letters TWI (Tread Wear Indicator) are visible on
the side of the tire. When approximately 1.6 mm (1/16 inch) is left on the tread,
the tread will be at the same height as the tread wear indicator. Replace the tire
as soon..