Volvo XC90: Lighting / Reset procedure for pinch protection
If you experience any problems with the electrical functions for the power
windows, you can try to perform a reset.
WARNING
If the starter battery is disconnected, the function for automatic opening
and closing must be reset to function correctly. A reset is required in order for
the pinch protection to work.
Consult a workshop if you experience any problems with the panoramic roof.1
Resetting a power window
- Start with the window in the closed position.
- Then move the control in manual mode three times upward toward the closed
position.
- The system will be automatically activated.
If the problem persists, contact a workshop.
1 An authorized
Volvo workshop is recommended.
All power windows and sun curtains* have a pinch protection function that
is triggered if anything blocks them while they are opening or closing.
If pinch protection is activated, movement will stop and then retract automatically
to approx...
Every door has a control panel for the power windows. The driver's door has
controls for operating all windows and for activating the child safety locks...
Other information:
Active high beams is a function that uses camera sensors in the upper edge
of the windshield to detect the headlights of approaching vehicles or the taillights
of the vehicle directly ahead. When either of these is detected, the vehicle's headlights
will automatically switch from high beams to low beams...
It is important that seat belts are worn correctly during pregnancy and that
pregnant drivers adjust their seating position accordingly.
Seat belt
The seat belt should fit closely against the shoulder, with the diagonal section
between the breasts and to the side of the stomach...