Volvo XC90: Creating and registering a Volvo ID / Technician certification
In addition to Volvo factory training, Volvo supports certification by the
National Institute for Automotive Service Excellence (A.S.E.).
Certified technicians have demonstrated a high degree of competence in specific
areas. Besides passing exams, each technician must also have worked in the field
for two or more years before a certificate is issued. These professional technicians
are best able to analyze vehicle problems and perform the necessary maintenance
procedures to keep your Volvo at peak operating condition.
Incorrectly connected or installed software or diagnostic tools may have an
adverse effect on the vehicle's electronics.
We strongly recommend that Volvo owners use only genuine, Volvo-approved accessories,
and that accessory installations be performed only by a trained and qualified Volvo
service technician...
When contacting a Volvo retailer, about e.g. your Volvo On Call subscription,
your Vehicle Identification Number (VIN1
) may be needed.
Tap Settings in the center display's Top view...
Other information:
It may be necessary to drive the vehicle through standing water e.g. deep
puddles or flooding on the road. This must be done with great caution.
The vehicle can be driven through water up to a depth of 45 cm (17 in) at no
more than walking speed. Be particularly careful when driving through flowing water...
The headlight bulbs can be replaced without the assistance of a workshop,
but before a bulb can be replaced, the plastic cover over the headlight needs to
be removed.
Lift the rubber strip by pressing
it inward into the engine compartment.
Release the pins in the plastic
cover's four clips by pressing them down with a screwdriver or similar object and
remove the covering...