Volvo XC90: Maintenance and service / Location of exterior lights
The vehicle's exterior lighting consists of several different bulbs. LED1
bulbs must be replaced by a workshop. An authorized Volvo workshop is recommended.
Front bulbs (vehicles with halogen headlights)

Low beams
High beams
Daytime running light/parking light
Turn signal
Front fog light/cornering illumination*
(LED)
Rear bulbs

Brake light (LED)
Parking light (LED)
Backup light2
Parking light (LED)
Turn signal (LED)
Fog light (LED)
Brake light ‒ central, high-mounted
(LED)
1 LED (Light Emmitting Diode)
2 Contact a workshop for replacement ‒ an authorized
Volvo workshop is recommended.
* Option/accessory.
Most of the bulbs in the headlight housing can be accessed when the rectangular
cover is removed.
Before the rectangular cover can be removed, the plastic covering over the headlight
must be removed...
The low beam bulbs in the halogen headlights can be changed without the help
of a workshop.
Before the bulbs can be replaced, the plastic covering over the headlight must
be removed...
Other information:
(Option/accessory.)
(Depending on market, this function can be either standard or optional.)
Pilot Assist can be deactivated and put in standby mode. This may happen automatically
or be due to driver intervention.
Standby mode means that the function is selected in the instrument panel but
not activated...
(Depending on market, this function can be either standard or optional.)
Adaptive Cruise Control (ACC2) can be deactivated and switched
off.
Press the button on the steering
wheel (1).
The symbol and markings turn gray – Adaptive Cruise Control goes into
standby mode...